paisanorojo@aol.com

Use this forum to chat with the makers of VP3DL, ask guestions, offer suggestions or even just tell them how much you like the game. Post VP3DL bug reports here. Please post any next gen suggestions in the Virtual Pool 3 Nextgen forum.

Moderators: 9balldotcom, vpeer

Post Reply
Envilliar-do

paisanorojo@aol.com

Post by Envilliar-do »

Hi: please I need the sonebody help my.
I not understhand what happening whit my vp3 game.
Everything working good but when I try to play online, see the signe:
" CONNETION" ATTEMPTING TO CONNET TO SERVER.
THIS MAY TAKE A MINUTE OR SO. And I never have the connetion.
Please that you exp. to how fix this problem.
I hop that you help my.
If I buy the new cd. program, have the same problem?

I hop that you help my. Thank you very moch for you time.
User avatar
zwylle
Cuemaster
Cuemaster
Posts: 869
Joined: Mon Oct 04, 2004 10:47 am
Location: Germany

Post by zwylle »

It is possible to play with the old version on Gamespy in rooms that ar marked as '3099'.

Check here how to do that:
http://www2.phpbb-host.com/phpbb/viewto ... &mforum=vp (English)
http://www2.phpbb-host.com/phpbb/viewto ... &mforum=vp (French)
http://www2.phpbb-host.com/phpbb/viewto ... &mforum=vp (Portuguese)
http://www2.phpbb-host.com/phpbb/viewto ... &mforum=vp (German)

The English and German versions of that info contain details about the new download version 3217.
______________
"If I can accomplish a minor task thousands have already completed, using readily available methods and tools, then I can do anything!" (Unknown)
sharkey9
VWSC 2007
Posts: 228
Joined: Tue Oct 12, 2004 4:24 am
Location: Germany

Post by sharkey9 »

this seems more a router/firewall/port problem than a problem with the version...
User avatar
zwylle
Cuemaster
Cuemaster
Posts: 869
Joined: Mon Oct 04, 2004 10:47 am
Location: Germany

Post by zwylle »

sharkey9 wrote:this seems more a router/firewall/port problem than a problem with the version...
Right, that's why the router/firewall setup is explained in the links I posted above.

:bootyshake:
______________
"If I can accomplish a minor task thousands have already completed, using readily available methods and tools, then I can do anything!" (Unknown)
Guest

Post by Guest »

I had the same (and many other problems) getting set up.
I found the answer to this was making sure the ports 60876-60976 were open.
These are the "doors" to the rooms?
I only opened up the first 12 ports since i was unable to do ranges and i put them as eg: vp3.exe 60876-60876 tcp
vp3.exe 60876-60876 udp
vp3.exe 60877-60877 tcp
vp3.exe 60877-60877 udp ......

All as explained on zwylle`s help page.

Hope this helps.
I know how annoying setting up things can be!!!!
Post Reply